- Car Buying
- Car Selling
- Car Ownership
- Car Aftermarket
- On The Move
- Lifestyle
AGS-688 is a gas analyser used to measure gas concentrations in the exhaust of petrol engines. It can be used both for exhaust check in periodic mandatory tests and for ordinary service and maintenance operations on petrol engines.
Operating Modes
The device samples the exhaust gas by means of its probe, supplied as a standard. By means of its simple keyboard, it is possible to perform all of the analyser’s functions, and easily switch from the free measurement mode to the official exhaust test.
The AGS-688 comes with 6 backlighted LCD units, where test data are displayed. At the end of the exhaust gas test, it is possible to directly print the test results, or send them to a PC connected to the gas analyser. Connections to the power supply, to RPM and temperature probes (with cable or wireless) to an external PC (via cable or wireless), are also present on the rear of the device.
New Pneumatic Unit
The completely new Water Separator Group is injection moulded, in order to reduce the gas path's length and maintenance times. The separation filter consists of two sections: a mechanical filter and a coalescent (condensation) one. A single axle, dual-head pump allows for continuous removal of the water which condenses into the separator. AGS-688 has exhaust gas and fresh air (autozero) inputs, and also a dedicated inlet for calibration with reference gases.
Features
The AGS-688 was designed as a basic exhaust gas analyser; nevertheless, its wide range of optional accessories allows for a rich set of additional functions:
Read more [+]
Operating Modes
The device samples the exhaust gas by means of its probe, supplied as a standard. By means of its simple keyboard, it is possible to perform all of the analyser’s functions, and easily switch from the free measurement mode to the official exhaust test.
The AGS-688 comes with 6 backlighted LCD units, where test data are displayed. At the end of the exhaust gas test, it is possible to directly print the test results, or send them to a PC connected to the gas analyser. Connections to the power supply, to RPM and temperature probes (with cable or wireless) to an external PC (via cable or wireless), are also present on the rear of the device.
New Pneumatic Unit
The completely new Water Separator Group is injection moulded, in order to reduce the gas path's length and maintenance times. The separation filter consists of two sections: a mechanical filter and a coalescent (condensation) one. A single axle, dual-head pump allows for continuous removal of the water which condenses into the separator. AGS-688 has exhaust gas and fresh air (autozero) inputs, and also a dedicated inlet for calibration with reference gases.
Features
The AGS-688 was designed as a basic exhaust gas analyser; nevertheless, its wide range of optional accessories allows for a rich set of additional functions:
- An integrated RPM meter is available, which can support a...
Read more [+]
|
|
Recommended for you