Cquartz Finest is embellished formula coat of Cquartz coat. Using stronger condensed nano particles with better cross linking between each other. With new secret nano material used in making “3D” structure, to create a tough nano structure.
One group(O+Si+O) link to another group by a special cross linker Agent which produces cellulose dense joint nano 3D structure coat, giving a permanent layer protection.
Features
- Cquartz Finest is harder, thicker, with less water drops left on surface (sliding angle) and glossier than Cquartz.
- Anti Fouling effect: Low sliding angle ensure less droplets left on surface, less droplets = less possible water marks.
- Up to 30% more effect. Cquartz Finest will give more anti-scratch protection on car paint surface (extra increase hardness up to 2H*) with same easy application way.
- Cquartz Finest can be applied on any kind of surface and layered as well.
* Vary on paint surface hardness.
Specifications
- Water contact angle 100~110°
- Sliding angle 15~25°
- Thickness 2~3µm
- Heat resistance >300°C
- Increase hardness up to 2H** (**depend on surface hardness)
Performance
- Cquartz Finest achieve amazing increase Mohs hardness up to 2H, unleash the amazing protection Anti scratch effect! It has a very high durability compared with any general protective coating, retaining the high super gloss coat.
- Mohs hardness: German scientist Friedrich Mohs created Comparison of hardness rules, from the softest to the hardest level divided into grade 1-10.
- If Cquartz is what you need, Cquartz Finest is what you want!
ApplicationCquartz Finest...
Read more [+]Cquartz Finest is embellished formula coat of Cquartz coat. Using stronger condensed nano particles with better cross linking between each other. With new secret nano material used in making “3D” structure, to create a tough nano structure.
One group(O+Si+O) link to another group by a special cross linker Agent which produces cellulose dense joint nano 3D structure coat, giving a permanent layer protection.
Features
- Cquartz Finest is harder, thicker, with less water drops left on surface (sliding angle) and glossier than Cquartz.
- Anti Fouling effect: Low sliding angle ensure less droplets left on surface, less droplets = less possible water marks.
- Up to 30% more effect. Cquartz Finest will give more anti-scratch protection on car paint surface (extra increase hardness up to 2H*) with same easy application way.
- Cquartz Finest can be applied on any kind of surface and layered as well.
* Vary on paint surface hardness.
Specifications
- Water contact angle 100~110°
- Sliding angle 15~25°
- Thickness 2~3µm
- Heat resistance >300°C
- Increase hardness up to 2H** (**depend on surface hardness)
Performance
- Cquartz Finest achieve amazing increase Mohs hardness up to 2H, unleash the amazing protection Anti scratch effect! It has a very high durability compared with any general protective coating, retaining the high super gloss coat.
- Mohs hardness: German scientist Friedrich Mohs created Comparison of hardness rules, from the softest to the hardest level divided into grade 1-10.
- If Cquartz is what you need, Cquartz Finest is what you want!
ApplicationCquartz Finest application is the same as Cquartz user guide.
- Remove tar spots, iron spots from all car surface using TarX and IronX. Clay the car if needed.
- Wash the car thoroughly in a very detailed wash. Using IronX Snow Soap. Rinse well.
- Polish car surface to best high standards using Fixer 1Step Polish.
- Remove polish&oil residue using Eraser and inspect the paint. Dry well the car using air pressure gun.
Apply Cquartz Finest to the car surface using the kit components.
- Please test the FINEST first on small spot to check cure time
- Cure time before wipe off between 10 to 20 min at 30 to 10°C respectively. (vary on humidity as well), wipe off gently using the 40cm2 suede MF supplied, surface should feel dry feeling while wiping.
- Notice: On single stage paint Finest react even faster. Once applied, wipe off in 30 seconds maximum with the Suede MF.
- Touch dry in 1 hour, full hardness time with no rain 24h (average 20~30°C ,at 60% humidity).
- Full hardness time without baking at less than 15°C : 7 days.
- We strongly recommend applying 2 to 3 layers, maximum waiting time between layers 20 to 30 min, not more. Or wait 2 hours after first layer has dried before applying second one (no "sweating" on the surface while applied second layer).
- IR heater lights are recommended for fast drying the FINEST coat after all layers is applied.
- Recommended face and hand protection while using. Work in ventilated area.
Precautions & MaintenanceWater spots and rain drops must be wiped off during dry time process. The chloride or minerals in water may cause white dots on car paint.
Avoid washing your car in automatic car washes. The water beading effect of coating will not get damaged by car washing machines. However, if the auto carwash bristles are dirty and too sharp, it may cause tiny scratches, especially dark coloured cars. Hand washing is highly recommended.
Important NoticeWashing with high Alkali cleaner (> 12 pH) more then 5 min on car surface might affect the coat.
Cquartz Finest kit contains
- 1 50ml bottle
- 5 suede MF 10cm2
- 1 suede MF 40cm2
- 1 3M face mask
- 1 applicator
- 1 warranty card
- 1 warranty car sticker
Read less [-]
Brand Manager for this product?
