Scosche 600C4 is completely redesigned amplifier assortment has been engineered for the discerning car audio enthusiast. Each amplifier uses a MOSFET power supply and low noise circuitry for the highest performance capabilities. Boasting 0-12dBA variable 45Hz bass boost, high and low level inputs, and five-way protection circuitry (thermal, short circuit, impedance, voltage, reverse polarity) this amplifier is rock solid.
Features
- EFX 4-Channel Class A/B Car Amplifier
- RMS Power Rating:
- 4 ohms: 100 watts x 4 chan.
- 2 ohms: 125 watts x 4 chan.
- Bridged, 4 ohms: 600 watts x 2 chan.
- MOSFET switching transistors power supply
- Low noise circuitry
- LED power and protect indicators
- Bass Boost (0-12 dB bass boost at 45 Hz)
- Multi-mode capability
- Soft start turn on/off
- 4/3/2 channel operation
- Illuminated logo badge
- Line level and speaker-level inputs with signal sensing for automatic turn-on
- Preamp RCA outputs loop through
- 5-Way System Protection circuitry (thermal, overload, speaker short protection, impedance, and reverse polarity)
- Heavy duty brushed aluminum alloy heatsink and top plate for extreme heat dissipation
- Sturdy aluminum side panels
- Silver-plated RCA level inputs
- Silver-plated screw terminals
- Variable high-pass filter (40-400 Hz, 12 dB/octave)
- Variable low-pass filter (40-400 Hz, 12 dB/octave)
- Subsonic Filter (24 dB at 15 Hz)
- CEA-2006 compliant amplifier
- Frequency response: 20-20,000 Hz
- Dimensions: 17-5/8"L x 10-1/2"W x 2-3/8"H
- 4-gauge power and ground wiring is required for installation
Power Specifications
Read more [+]
Scosche 600C4 is completely redesigned amplifier assortment has been engineered for the discerning car audio enthusiast. Each amplifier uses a MOSFET power supply and low noise circuitry for the highest performance capabilities. Boasting 0-12dBA variable 45Hz bass boost, high and low level inputs, and five-way protection circuitry (thermal, short circuit, impedance, voltage, reverse polarity) this amplifier is rock solid.
Features
- EFX 4-Channel Class A/B Car Amplifier
- RMS Power Rating:
- 4 ohms: 100 watts x 4 chan.
- 2 ohms: 125 watts x 4 chan.
- Bridged, 4 ohms: 600 watts x 2 chan.
- MOSFET switching transistors power supply
- Low noise circuitry
- LED power and protect indicators
- Bass Boost (0-12 dB bass boost at 45 Hz)
- Multi-mode capability
- Soft start turn on/off
- 4/3/2 channel operation
- Illuminated logo badge
- Line level and speaker-level inputs with signal sensing for automatic turn-on
- Preamp RCA outputs loop through
- 5-Way System Protection circuitry (thermal, overload, speaker short protection, impedance, and reverse polarity)
- Heavy duty brushed aluminum alloy heatsink and top plate for extreme heat dissipation
- Sturdy aluminum side panels
- Silver-plated RCA level inputs
- Silver-plated screw terminals
- Variable high-pass filter (40-400 Hz, 12 dB/octave)
- Variable low-pass filter (40-400 Hz, 12 dB/octave)
- Subsonic Filter (24 dB at 15 Hz)
- CEA-2006 compliant amplifier
- Frequency response: 20-20,000 Hz
- Dimensions: 17-5/8"L x 10-1/2"W x 2-3/8"H
- 4-gauge power and ground wiring is required for installation
Power Specifications
RMS Power @ 4 ohms |
100 watts x 4 channels |
RMS Power @ 2 ohms |
125 watts x 4 channels |
Bridged RMS Power |
600 watts x 2 channels |
Peak Power Output |
300 watts x 4 channels |
Amplifier Specifications
Amplifier Class |
AB |
Number of Channels |
4 |
Total RMS Power Output |
1200 watts |
Maximum Input Gauge Size |
4 AWG |
Minimum Impedance Unbridged |
2 ohms |
Minimum Impedance Bridged |
4 ohms |
THD at Rated RMS Power |
1% |
Speaker Level Inputs |
Yes |
Preamp Outputs |
1 pair |
Built-in Crossover |
Low-pass (LP) High-pass (HP) Full (AP) |
High-Pass Crossover Frequency |
40 - 400 Hz |
Low-Pass Crossover Frequency |
40 - 400 Hz |
Subsonic Filter |
15 Hz |
Signal-to-Noise Ratio |
90 dB |
Bass Boost |
0 - 12 dB |
Bass/Gain Remote |
No |
Fan Cooled |
No |
Fuse Rating |
40A x 2 |
CEA-2006 Compliant |
Yes |
Read less [-]