V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performanceand appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come.
The MRP-F300 4-channel amplifier sends 50 watts RMS to each of your front and rear speakers, or switches to 2-channel mode to power a pair of subwoofers. You can also switch to 3-channel mode, then power a subwoofer with 150 watts RMS while the other two channels power a pair of full-range speakers.
High- and low-pass filters put you in command of the frequencies that reach your speakers, while the bass boost is armed with plenty of low-end punch. Preamp- and speaker-level inputs allow you to connect this amp in almost any vehicle. Let a V-Power amplifier transform the sound of your car's audio system.
Features
- 75W RMS x 4 (2 ohm)
- 50W RMS x 4 (4 ohm )
- 150W RMS x 2(2 ohm )
- Built-in Crossover
- Bass EQ
- Class A/B Amplification Circuit
- Speaker Level Inputs
- Thermal Management Processor
Specifications
- RMS Continuous Power (at 14.4 V, 20 - 20kHz)
- Per channel into 4 ohms (≤1% THD+N): 50 W x 4
- Per channel into 2 ohms (≤1% THD+N): 75 W x 4
- Briged 4 ohms (≤1% THD+N): 150 W x 2
- Total MAX Power: 640 W
- S/N Ratio
- IHF A Weighted, Reference: rated power into
- 4 ohms: 100 dBA
- Input Impedance
- RCA IN: 15k ohms
- SP IN: 20k ohms
- Frequency Response (+0, -1dB): 20Hz - 20kHz
- Crossover Frequency
- 1/2ch: 50 - 400 Hz (-12dB/oct.)
- 3/4ch: 50 - 400 Hz (-12dB/oct.)
- I...
Read more [+]V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performanceand appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come.
The MRP-F300 4-channel amplifier sends 50 watts RMS to each of your front and rear speakers, or switches to 2-channel mode to power a pair of subwoofers. You can also switch to 3-channel mode, then power a subwoofer with 150 watts RMS while the other two channels power a pair of full-range speakers.
High- and low-pass filters put you in command of the frequencies that reach your speakers, while the bass boost is armed with plenty of low-end punch. Preamp- and speaker-level inputs allow you to connect this amp in almost any vehicle. Let a V-Power amplifier transform the sound of your car's audio system.
Features
- 75W RMS x 4 (2 ohm)
- 50W RMS x 4 (4 ohm )
- 150W RMS x 2(2 ohm )
- Built-in Crossover
- Bass EQ
- Class A/B Amplification Circuit
- Speaker Level Inputs
- Thermal Management Processor
Specifications
- RMS Continuous Power (at 14.4 V, 20 - 20kHz)
- Per channel into 4 ohms (≤1% THD+N): 50 W x 4
- Per channel into 2 ohms (≤1% THD+N): 75 W x 4
- Briged 4 ohms (≤1% THD+N): 150 W x 2
- Total MAX Power: 640 W
- S/N Ratio
- IHF A Weighted, Reference: rated power into
- 4 ohms: 100 dBA
- Input Impedance
- RCA IN: 15k ohms
- SP IN: 20k ohms
- Frequency Response (+0, -1dB): 20Hz - 20kHz
- Crossover Frequency
- 1/2ch: 50 - 400 Hz (-12dB/oct.)
- 3/4ch: 50 - 400 Hz (-12dB/oct.)
- Input Sensitivity (RCA IN): 0.2 - 4 V
- Subsonic Filter: 15Hz, Fixed
- BASS EQ: 50Hz, +12dB(3/4ch), On/Off
High Performance, High Value
Want serious power for your system? While trying not to blow your budget? Go with one of the Alpine V-Power amps for unbeatable dollar-per-watt value and Alpine quality sound, along with Bass EQ for maximizing bass performance.
Clean, Efficient Power
Alpine's high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.
Exceptionally Easy Upgrade
The V-Power's speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power series ideal for upgrading factory audio equipment. High-level speaker inputs and flush mount controls make for easy installation. The units come with end caps that cover and protect your wiring connections while creating a clean, finished appearance. Step up your factory system to Alpine sound.
Cooler Amps = No Shut Down Rugged heat sinks and an extremely sophisticated thermal managament processor that continuously monitors the amp's temperature, ensure nonstop output and stable, reliable performance.
Best Bass Performance
Easy Upgrade and Other Cool Features
Keep your factory system and step up to Alpine sound. The V-Power speaker level inputs connect directly to any factory radio, without the need for external converters. The advanced Thermal Management Processor provides thermal protection, keeping the amp cool and letting you play long.
- Best Dollar-Per-Watt performance
- The Perfect Upgrade Choice
- Sleek Aggressive Design
Power up your system with Alpine's V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance - only the best - so you get the sound you deserve.
V-Power amps have a special Bass EQ function that boosts the bass frequencies and maximises the bass performance of your system.
Read less [-]
Brand Manager for this product?
