Threebond TB 1200 Series consists of Threebond Liquid Gasket 1211, 1212 and 1215.

• Low Viscosity, Sag Type, White Colour, General Usage
• High Viscosity, Non Sag Type, White Colour, General Usage
• High Chemical Resistant, Grey Colour, Gear Case, FIPG, Engine Oil Pan, etc

Threebond Liquid Gasket TB1211 is a liquid gasket sealant creates a more efficient seal between two surfaces due to the additional factor of a bond in conjunction with a seal and high chemical resistance.

RTV silicone liquid gasket designed to be a diverse gasketing solution for engines and gearboxes.

• High resistance to temperature, oils, fuel and coolants
• Oxygen Sensor Safe
• Non Corrosive
• Diverse applications

Threebond high temp silicone liquid gasket products have been tested in extreme conditions on racetracks worldwide with proven results.

Threebond high temp silicone liquid gaskets are utilised by the world's leading vehicle manufacturers such as: Nissan, GM, GMH, Toyota, Subaru, Honda, Daihatsu, Mazda, Kawasaki, Suzuki, Yamaha, Isuzu, Cummins, Kubota & Hitachi.

Features

• Low Viscosity
• Sag Type
• White Colour
• General Usage

Threebond TB1212 is a white single-component, solvent free and non-acid RTV-Silicone (Room Temperature Vulcanising) rubber. An oxime neutral cure type, TB1212 can be used for general sealing as well as for electrical insulation. It presents no offensive odour during curing, and will not corrode metal (corrosion of copper based metals may occur when hermetically sealed).

In addition, TB1212 adheres well on alkali materials such as mortar and cement. TB 1212 has outsta...

Read more [+]

Threebond TB 1200 Series consists of Threebond Liquid Gasket 1211, 1212 and 1215.

• Low Viscosity, Sag Type, White Colour, General Usage
• High Viscosity, Non Sag Type, White Colour, General Usage
• High Chemical Resistant, Grey Colour, Gear Case, FIPG, Engine Oil Pan, etc

Threebond Liquid Gasket TB1211 is a liquid gasket sealant creates a more efficient seal between two surfaces due to the additional factor of a bond in conjunction with a seal and high chemical resistance.

RTV silicone liquid gasket designed to be a diverse gasketing solution for engines and gearboxes.

• High resistance to temperature, oils, fuel and coolants
• Oxygen Sensor Safe
• Non Corrosive
• Diverse applications

Threebond high temp silicone liquid gasket products have been tested in extreme conditions on racetracks worldwide with proven results.

Threebond high temp silicone liquid gaskets are utilised by the world's leading vehicle manufacturers such as: Nissan, GM, GMH, Toyota, Subaru, Honda, Daihatsu, Mazda, Kawasaki, Suzuki, Yamaha, Isuzu, Cummins, Kubota & Hitachi.

Features

• Low Viscosity
• Sag Type
• White Colour
• General Usage

Threebond TB1212 is a white single-component, solvent free and non-acid RTV-Silicone (Room Temperature Vulcanising) rubber. An oxime neutral cure type, TB1212 can be used for general sealing as well as for electrical insulation. It presents no offensive odour during curing, and will not corrode metal (corrosion of copper based metals may occur when hermetically sealed).

In addition, TB1212 adheres well on alkali materials such as mortar and cement. TB 1212 has outstanding mechanical resistance against shear forces, with excellent adhesion even to slightly polluted surfaces. It is extremely fast curing with no shrinkage and no generation of corrosive gases. It permits normal disassembly.

Features

• High viscosity
• Non sag type
• White colour
• General usage

Threebond 1215 is a silicone rubber based one component type grey coloured liquid gasket. It sets automatically at room temperature when it reacts to the moisture in the air. No hardeners, activators or heating required. Threebond 1215 increases bond strength in the course of hardening. The resultant rubber-like solid resists both heat and cold - maintains stability original status under a wide range of temperature as from -60C to +250C.

Features

• High resistance to heat, cold, weather and has excellent electric insulation property
• Little shrinkage occurs as it does not contain solvent
• Suitable for sealing comparatively large clearances
• Effective temperature range -60°C to +250°C
• Recommended for a wide variety of engines
• Outstanding resistance against vibration
• Long tack-free time
• Fully cured in 24 hours
• Excellent adhesion to slighly oily surfaces
• Sensor safe
• Normal disassembly

Application

• Seals various flange surfaces
• Suitable for sealing wide surfaces
• Can be used together with solid gasket

Read less [-]

+ View All "23 Dealers"