The FPS 1500 mono subwoofer amplifier delivers up to 550 watts RMS to a 2-ohm sub — plenty enough to fill most vehicles with clean and powerful bass. This amp can handle low-impedance loads, so you can power a 1-ohm sub with 800 RMS watts of thunder. Low-pass and subsonic filters, a bass boost, and a phase switch let you tailor the sound to complement your vehicle and sub enclosure.

The power supply in the FPS 1500 uses a unique circuit design to ensure stable performance under any conditions. A heavy heatsink with a thermostat-controlled, progressive-speed fan keeps all the parts running cool. Focal's engineers stripped all signal paths of side-tracking circuits, so your music makes its way through the amp with maximum fidelity and minimum interference. Dynamic soft clipping allows an ultra-clean signal to pass to your subs while protecting them from destructive "clipped" distortion.

Specifications

• Low-pass filter: 50Hz - 500Hz
• SUBSONIC filter: Variable from 20 to 50Hz (24dB/oct.) released
• Remote control: Yes
• Adjustable BASS BOOST level: 0/+9dB linear
• Variable phase: 0-180° linear
• Fuse(s): 2*40A
• Nominal power measured at 14.4V continuously into 4 Ohms THD + N
• Input impedance: 35kΩ
• Damping factor @ 4 Ohms: 220
• Signal/Noise ratio (RMS): 87dBA
• Frequency response: 10Hz - 2.5kHz
• Input sensitivity: 0.2V - 5.2V
• Maximum cross section of power cables: 35mm2 / 2 AWG
• Protections: Short-circuit Thermal overload Soft clipping High voltage Polarity reversal
• Dimensions (H x W x D): 59 x 353 x 254mm
• Nominal power measured at 14.4V continuously into 2 Ohms THD + N
• Nomi...

Read more [+]

The FPS 1500 mono subwoofer amplifier delivers up to 550 watts RMS to a 2-ohm sub — plenty enough to fill most vehicles with clean and powerful bass. This amp can handle low-impedance loads, so you can power a 1-ohm sub with 800 RMS watts of thunder. Low-pass and subsonic filters, a bass boost, and a phase switch let you tailor the sound to complement your vehicle and sub enclosure.

The power supply in the FPS 1500 uses a unique circuit design to ensure stable performance under any conditions. A heavy heatsink with a thermostat-controlled, progressive-speed fan keeps all the parts running cool. Focal's engineers stripped all signal paths of side-tracking circuits, so your music makes its way through the amp with maximum fidelity and minimum interference. Dynamic soft clipping allows an ultra-clean signal to pass to your subs while protecting them from destructive "clipped" distortion.

Specifications

• Low-pass filter: 50Hz - 500Hz
• SUBSONIC filter: Variable from 20 to 50Hz (24dB/oct.) released
• Remote control: Yes
• Adjustable BASS BOOST level: 0/+9dB linear
• Variable phase: 0-180° linear
• Fuse(s): 2*40A
• Nominal power measured at 14.4V continuously into 4 Ohms THD + N
• Input impedance: 35kΩ
• Damping factor @ 4 Ohms: 220
• Signal/Noise ratio (RMS): 87dBA
• Frequency response: 10Hz - 2.5kHz
• Input sensitivity: 0.2V - 5.2V
• Maximum cross section of power cables: 35mm2 / 2 AWG
• Protections: Short-circuit Thermal overload Soft clipping High voltage Polarity reversal
• Dimensions (H x W x D): 59 x 353 x 254mm
• Nominal power measured at 14.4V continuously into 2 Ohms THD + N
• Nominal power measured at 14.4V continuously into 1 Ohm THD + N

Read less [-]