The FPS 2160 2-channel amplifier sends 105 watts RMS per channel to a pair of full-range speakers or a set of components — plenty enough to fill your vehicle with clean and powerful sound. Or, you can switch this amp to single-channel mode and drive a subwoofer with 360 watts RMS of bass thunder. High-pass, low-pass, and band-pass filtering adjusts the output to match a wide variety of speakers, components, and sub combinations.

Specifications

• High-pass filter: 50Hz - 500Hz 500Hz - 5kHz
• Low-pass filter: 50Hz - 500Hz 500Hz - 5kHz
• Fuse(s): 2*30A
• Nominal power measured at 14.4V continuously into 4 Ohms THD + N
• Input impedance: 13kΩ
• Damping factor @ 4 Ohms: 250
• Signal/Noise ratio (RMS): 92dBA
• Frequency response: 10Hz - 52kHz
• Input sensitivity: 0.2V - 5.2V
• Maximum cross section of power cables: 35mm2 / 2 AWG
• Protections: Short-circuit Thermal overload Soft clipping High voltage Polarity reversal
• Dimensions (H x W x D): 59 x 353 x 254mm
• Nominal power measured at 14.4V continuously into 2 Ohms THD + N
• Power in bridged mode measured at 14.4V continuously into 4 Ohms THD + N