METX Engine Formula is to be applied directly to the engine oil compartment. Engine Formula is not engine oil. It works independently of the engine oil on the inner engine surfaces. It does not affect the quality and consistency of the existing engine oil in your engine.

• Continues to provide 'lubrication' even after all oil has been removed. In any event, where Engine oil leaks away, you can safely drive to the nearest service station for servicing without overheating or damaging your engine.

• Increases your engine performance to give you better pick up and reduce engine drag while you experience a smoother, quieter, cooler ride. With a fuel efficiency of up to 15% and reduced frequency of vehicle maintenance, you can be sure to reduce stress to your pocket.

• Can also be used in large commercial/industrial engines. Large Gen Set engines also use METX Engine Formula to improve their fuel consumption/kWh ..up to 15%.

Application Procedure:



Cars/Vans/Trucks/other engines:

Step 1. Add Engine Formula to Engine oil in oil compartment (100ml Engine Formula to 1L engine oil).
Step 2. For the first application, rev engine at 3000RPM for about 15 minutes to activate METX molecules.
Step 3. After at least 1500-2000km or at next scheduled servicing, change engine oil to remove carbon deposits.
Step 4. Apply METX Engine Formula again after the engine oil change.

Motorcycles:



1. Add Engine Formula to the engine (About 50ml Engine Formula to every 1L engine oil).
2. After at least 500-1000km or at next scheduled servicing, change engine oil to remove carbon deposits. Apply second...

Read more [+]

METX Engine Formula is to be applied directly to the engine oil compartment. Engine Formula is not engine oil. It works independently of the engine oil on the inner engine surfaces. It does not affect the quality and consistency of the existing engine oil in your engine.

• Continues to provide 'lubrication' even after all oil has been removed. In any event, where Engine oil leaks away, you can safely drive to the nearest service station for servicing without overheating or damaging your engine.

• Increases your engine performance to give you better pick up and reduce engine drag while you experience a smoother, quieter, cooler ride. With a fuel efficiency of up to 15% and reduced frequency of vehicle maintenance, you can be sure to reduce stress to your pocket.

• Can also be used in large commercial/industrial engines. Large Gen Set engines also use METX Engine Formula to improve their fuel consumption/kWh ..up to 15%.

Application Procedure:



Cars/Vans/Trucks/other engines:

Step 1. Add Engine Formula to Engine oil in oil compartment (100ml Engine Formula to 1L engine oil).
Step 2. For the first application, rev engine at 3000RPM for about 15 minutes to activate METX molecules.
Step 3. After at least 1500-2000km or at next scheduled servicing, change engine oil to remove carbon deposits.
Step 4. Apply METX Engine Formula again after the engine oil change.

Motorcycles:



1. Add Engine Formula to the engine (About 50ml Engine Formula to every 1L engine oil).
2. After at least 500-1000km or at next scheduled servicing, change engine oil to remove carbon deposits. Apply second round METX.

After the second application, you need to change engine oil only every 2-3 cycles.

Apply METX every change to maintain.

Read less [-]