Xstream amplifiers are the results of professional engineers using the best equipment to get the job done. The Xstream bass amplifiers will produce more bass per watt than any other amplifier in the Soundstream line and possibly the world, while the full-range amplifiers give you the bright and accurate sound that you like.

Features

• Bass EQ Control: Fully adjustable subwoofer equalisation circuit providing frequency and boost ("Q") adjustment for optimum subwoofer performance. A frequency tracking subsonic filter protects woofers from potentially harmful low frequency information and maximises output in a usable range.
• Drive Delay II: Amplifier section powers up two to three seconds after the power supply, eliminating turn-on and off pops. The turn off process is reversed: Amplifier section turns off first, followed by the power supply.
• Flexible Input Level Control: Allows 500 mV to 4 V input sensativity.
• Trident three-way Protection
• IDI (Intelligent Distress Indicator)
• Thermal / Short / Over Load Protection
• Stability:
  
  • 2/4 ohms Stereo Mode
  • 4 ohms Mono/Bridged Mode
• P.W.M Mosfet Power Supply
• Power and Protection Indicator
• Selectable X-Over HPF / Full / LPF
• 18db Bass Boost with Switch Sub (50Hz)
• Frequency Response: 10Hz - 30kHz
• Variable High-Pass Crossover (50-500Hz)
• Variable Low-Pass Crossover (30Hz-500Hz)
• Variable Sub Sonic Filter: (60Hz-200Hz)
• Gold Plated Terminal Strips / RCA Jacks
• Heavy Duty Heat Sink
• Adjustable Input Sensativity
• Soft Delay Remote Turn-On
• Low Level Inputs
• Phantom Channel For Powering Center Speaker or Subwoofer
• Dimen...

Read more [+]

Xstream amplifiers are the results of professional engineers using the best equipment to get the job done. The Xstream bass amplifiers will produce more bass per watt than any other amplifier in the Soundstream line and possibly the world, while the full-range amplifiers give you the bright and accurate sound that you like.

Features

• Bass EQ Control: Fully adjustable subwoofer equalisation circuit providing frequency and boost ("Q") adjustment for optimum subwoofer performance. A frequency tracking subsonic filter protects woofers from potentially harmful low frequency information and maximises output in a usable range.
• Drive Delay II: Amplifier section powers up two to three seconds after the power supply, eliminating turn-on and off pops. The turn off process is reversed: Amplifier section turns off first, followed by the power supply.
• Flexible Input Level Control: Allows 500 mV to 4 V input sensativity.
• Trident three-way Protection
• IDI (Intelligent Distress Indicator)
• Thermal / Short / Over Load Protection
• Stability:
  
  • 2/4 ohms Stereo Mode
  • 4 ohms Mono/Bridged Mode
• P.W.M Mosfet Power Supply
• Power and Protection Indicator
• Selectable X-Over HPF / Full / LPF
• 18db Bass Boost with Switch Sub (50Hz)
• Frequency Response: 10Hz - 30kHz
• Variable High-Pass Crossover (50-500Hz)
• Variable Low-Pass Crossover (30Hz-500Hz)
• Variable Sub Sonic Filter: (60Hz-200Hz)
• Gold Plated Terminal Strips / RCA Jacks
• Heavy Duty Heat Sink
• Adjustable Input Sensativity
• Soft Delay Remote Turn-On
• Low Level Inputs
• Phantom Channel For Powering Center Speaker or Subwoofer
• Dimensions: 24.9"L x 12.4"W x 3"H

Specifications

• RMS Power @ 4 ohms: 90 watts x 4 channels
• RMS Power @ 2 ohms: 180 watts x 4 channels
• RMS Power @ 1 ohm: Not stable
• Bridged RMS Power: 360 watts x 2 channels
• Peak Power Output: 1440 watts approx.
• Number of Channels: 4
• Total RMS  Power Output: 720 watts
• Minimum Impedance Unbridged: 2 ohms
• Minimum Impedance Bridged: 4 ohms
• THD at Rated RMS Power: 0.05%
• Speaker Level Inputs: No
• Preamp Outputs: No
• Built-in Crossover: Low-pass (LP), High-pass (HP)
• High-Pass Crossover Frequency: 50 - 500 Hz
• Low-Pass Crossover Frequency: 30 - 500 Hz
• Subsonic Filter: 60 - 200 Hz
• Signal-to-Noise Ratio: 96 dB
• Channel Separation: N/A
• Bass Boost: 0 – 18 dB
• Bass/ Gain Remote: N/A
• Fan Cooled: No
• Fuse Rating: 30A x 2

Read less [-]