Kicker ZX1000.1 is pure KICKER power, ultimately developed to fuse with KICKER subwoofers and speakers for an incredible musical experience in any vehicle. But ZX power can be used with any gear in any installation - there's an option for every need.ZX-Series Amplifiers provide power in stereo, multi-channel, hybrid, or mono formats and are available in 20 different models, allowing plenty of options to exactly match any installation. And they'll visually add to any system a dark, rugged touch that leaves no doubt to the sorcery going on under its shroud.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Class: D
• Power (watts) Mono: 1000 @ 2 Ohms
• Remote Bass C...

Read more [+]

Kicker ZX1000.1 is pure KICKER power, ultimately developed to fuse with KICKER subwoofers and speakers for an incredible musical experience in any vehicle. But ZX power can be used with any gear in any installation - there's an option for every need.ZX-Series Amplifiers provide power in stereo, multi-channel, hybrid, or mono formats and are available in 20 different models, allowing plenty of options to exactly match any installation. And they'll visually add to any system a dark, rugged touch that leaves no doubt to the sorcery going on under its shroud.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Class: D
• Power (watts) Mono: 1000 @ 2 Ohms
• Remote Bass Control: Yes
• Length (in., mm): 20, 507
• Height: 2-1/8", 54mm
• Width: 9-5/8", 244mm
• Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
• Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
• 24dB/octave high-pass subsonic filter fixed @ 25Hz
• KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz

Read less [-]