The ZX300.1 mono subwoofer amp will drive your subs with up to 300 watts of power. No inflated "peak power" ratings here — you can trust that this amp's CEA-2006 compliant rating reflects a true measure of its capabilities. Like all Kicker amps, it's built with high-quality internal components for reliable performance.

The built-in low-pass filter removes high frequencies from the amp's output so you'll get the most out of your subwoofer, while a subsonic filter removes the extreme low bass that hampers system efficiency. Use the bass boost control to kick in a little more low-end bump — you can turn it on and off with the included wired remote control.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's ...

Read more [+]

The ZX300.1 mono subwoofer amp will drive your subs with up to 300 watts of power. No inflated "peak power" ratings here — you can trust that this amp's CEA-2006 compliant rating reflects a true measure of its capabilities. Like all Kicker amps, it's built with high-quality internal components for reliable performance.

The built-in low-pass filter removes high frequencies from the amp's output so you'll get the most out of your subwoofer, while a subsonic filter removes the extreme low bass that hampers system efficiency. Use the bass boost control to kick in a little more low-end bump — you can turn it on and off with the included wired remote control.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Class: A/B
• Power (watts) Mono: 300 @ 2 Ohms
• Remote Bass Control: No
• ZXRC Remote Bass capable (sold sep.): Yes
• Length (in., mm): 13-1/2, 342
• Height: 2-1/8", 54mm
• Width: 9-5/8", 244mm
• Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
• Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
• 24dB/octave high-pass subsonic filter fixed @ 25Hz
• KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz

Read less [-]