One of the best things about Kicker 2 Channel amplifiers is their ability to run either sub woofer or full range speakers. The ZX450.2 is ideal for almost any application and can be custom suited to any install. The amp is rated at a TRUE 225 Watts RMS and 450 Watts Peak @ 4 Ohm Bridged! The ZX450.2 amp includes a 12 dB octave variable crossover, a 95 dB signal to noise ratio and a remote bass knob to keep the bass at your fingertips!

The ZX450.2 amplifier is a Class A/B model amplifier which can be used as either a subwoofer or full range speaker amplifier. In general if running subs the amp works best at a 4 Ohm Bridged Load. In the Full Range mode the amplifier can be ran in a left and right stereo mode.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's thre...

Read more [+]

One of the best things about Kicker 2 Channel amplifiers is their ability to run either sub woofer or full range speakers. The ZX450.2 is ideal for almost any application and can be custom suited to any install. The amp is rated at a TRUE 225 Watts RMS and 450 Watts Peak @ 4 Ohm Bridged! The ZX450.2 amp includes a 12 dB octave variable crossover, a 95 dB signal to noise ratio and a remote bass knob to keep the bass at your fingertips!

The ZX450.2 amplifier is a Class A/B model amplifier which can be used as either a subwoofer or full range speaker amplifier. In general if running subs the amp works best at a 4 Ohm Bridged Load. In the Full Range mode the amplifier can be ran in a left and right stereo mode.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system (check for different specs on ZX300.1 and ZX700.5 amps)

Specifications

• Power (watts/channel) 2 Ohm Stereo: 225 x 2
• Power (watts/channel) 4 Ohm Bridged Mono: 450
• ZXRC Remote Bass Control capable (sold sep.): Yes
• Length (in.,mm): 16-3/4, 425
• Height: 2-1/8", 54mm
• Width: 9-5/8", 244mm
• Frequency Response: 20Hz-20kHz, +0/-1dB
• Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: 12dB/octave, variable 50Hz-200Hz selectable high pass, low pass, or all pass
• KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz

Read less [-]