The ZX350.4 4-channel amp will drive your speakers with 60 watts per channel. No inflated "peak power" ratings here — you can trust that this amp's CEA-2006 compliant rating reflects a true measure of its capabilities. Efficient heat sinks and rugged internal components ensure reliable operation and clean power output when the volume is cranked.

The built-in variable frequency filters adjust the amp's output to get the most out of your speaker setup,whether you're running full-range speakers or subs.Use the bass boost control to dial in the exact amount of low-end bump you're looking for.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Power (watts/channel) 2 Ohm...

Read more [+]

The ZX350.4 4-channel amp will drive your speakers with 60 watts per channel. No inflated "peak power" ratings here — you can trust that this amp's CEA-2006 compliant rating reflects a true measure of its capabilities. Efficient heat sinks and rugged internal components ensure reliable operation and clean power output when the volume is cranked.

The built-in variable frequency filters adjust the amp's output to get the most out of your speaker setup,whether you're running full-range speakers or subs.Use the bass boost control to dial in the exact amount of low-end bump you're looking for.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Power (watts/channel) 2 Ohm Stereo: 90 x 4
• Power (watts/channel) 4 Ohm Bridged Mono: 175 x 2
• Class D Power (watts) 2 Ohm Mono: -
• ZXRC Remote Bass Control capable (sold sep.): No
• Length (in., mm): 13-1/2, 342
• Height: 2-1/8", 54mm
• Width: 9-5/8", 244mm
• Frequency Response: 20Hz-20kHz (ZX700.5 25Hz-20kHz), +0/-1dB
• Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
• (ZX700.5 12dB/octave, full-range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50Hz-200Hz, low pass only)
• ZX700.5 only - 24dB/octave, sub channel high-pass subsonic filter fixed at 25Hz
• KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz

Read less [-]