ZX-Series Amplifiers provide the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound. Two-channel, four-channel, a five-channel hybrid and absurd monoblock amps round out a hard-working, noise-free lineup with heat sinks that can be personalized with edgy vinyl skins.

This ZX Series 10ZX700.5 5-channel amp employs a low-distortion Class AB design that'll power your front and rear speakers, along with a highly efficient Class D subwoofer section. You'll enjoy thrilling details, plenty of bass power, and newfound clarity from your vehicle's entire speaker system.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Power (watts...

ZX-Series Amplifiers provide the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound. Two-channel, four-channel, a five-channel hybrid and absurd monoblock amps round out a hard-working, noise-free lineup with heat sinks that can be personalized with edgy vinyl skins.

This ZX Series 10ZX700.5 5-channel amp employs a low-distortion Class AB design that'll power your front and rear speakers, along with a highly efficient Class D subwoofer section. You'll enjoy thrilling details, plenty of bass power, and newfound clarity from your vehicle's entire speaker system.

Features

• High-Efficiency Class-D Design in most monoblock amps
• KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
• Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
• Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
• Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
• Differential Hi- and Lo-Level Inputs for integration in any system
• Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
• All feature FIT™ Fail-Safe Integration Technology with advanced input design
• FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
• FIT's isolated inputs reject electrical interference for noise-free operation
• FIT's three turn-on modes interface with virtually any vehicle's electrical system

Specifications

• Power (watts/channel) 2 Ohm Stereo: 85 x 4
• Power (watts/channel) 4 Ohm Bridged Mono: 165 x 2
• Class D Power (watts) 2 Ohm Mono: 420
• ZXRC Remote Bass Control capable (sold sep.): Yes
• Length (in., mm): 20, 507
• Height: 2-1/8", 54mm
• Width: 9-5/8", 244mm
• Frequency Response: 20Hz-20kHz (ZX700.5 25Hz-20kHz), +0/-1dB
• Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
• (ZX700.5 12dB/octave, full-range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50Hz-200Hz, low pass only)
• ZX700.5 only - 24dB/octave, sub channel high-pass subsonic filter fixed at 25Hz
• KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz (ZX700.5 boost sub channel only)