ML 700 is a new cone midrange introduced to the Mille line, reproducing an extremely wide range of frequencies with absolutely remarkable acoustic emission. The ML 700 unique materials used in this remarkable driver are plain to the pressed-pulp cone combined with cotton fibres, the Natural Butyl Rubber surround, the spider constructed from Nomex®, the CCAW (Copper Clad Aluminium Wire) voice coil wound on a Kapton® former.

Additionally, the use of the advanced Klippel Scanning Vibrometer measurement instrument provided fine-tuning of the motor assembly to obtain a mid-frequency range with linearity and accuracy. The self-supporting basket and butyl rubber cover make the ML 700 a perfect and unique component both for two-way and three-way configurations.

1. The pressed-pulp cone is enriched with cotton fibres combined with water-repellent impregnants. With the absence of the traditional dustcap, the exponential profile generates an outstanding dispersion pattern. 
2. The central pole piece is covered with a pure copper sleeve. This combined with its 20 mm CCAW double layer voice coil wound on a Kapton® former provides a linear impedance.
3. The motor assembly is centred upon a uniquely sized REN® Neodymium ring.
4. Anti-resonant aluminium alloy basket; the unique low incidence spokes offer minimum resistance to rear wave emissions. 
5. Nomex® spider with integrated lead wires.
6. The butyl rubber cover protects the magnet and contributes to the reduction of unwanted resonances and residual vibrations.

Specifications

• Component: Midrange
• Size mm: (inch) 70 (2” 3/4) 
• Power Handlin...

Read more [+]

ML 700 is a new cone midrange introduced to the Mille line, reproducing an extremely wide range of frequencies with absolutely remarkable acoustic emission. The ML 700 unique materials used in this remarkable driver are plain to the pressed-pulp cone combined with cotton fibres, the Natural Butyl Rubber surround, the spider constructed from Nomex®, the CCAW (Copper Clad Aluminium Wire) voice coil wound on a Kapton® former.

Additionally, the use of the advanced Klippel Scanning Vibrometer measurement instrument provided fine-tuning of the motor assembly to obtain a mid-frequency range with linearity and accuracy. The self-supporting basket and butyl rubber cover make the ML 700 a perfect and unique component both for two-way and three-way configurations.

1. The pressed-pulp cone is enriched with cotton fibres combined with water-repellent impregnants. With the absence of the traditional dustcap, the exponential profile generates an outstanding dispersion pattern. 
2. The central pole piece is covered with a pure copper sleeve. This combined with its 20 mm CCAW double layer voice coil wound on a Kapton® former provides a linear impedance.
3. The motor assembly is centred upon a uniquely sized REN® Neodymium ring.
4. Anti-resonant aluminium alloy basket; the unique low incidence spokes offer minimum resistance to rear wave emissions. 
5. Nomex® spider with integrated lead wires.
6. The butyl rubber cover protects the magnet and contributes to the reduction of unwanted resonances and residual vibrations.

Specifications

• Component: Midrange
• Size mm: (inch) 70 (2” 3/4) 
• Power Handling: W Peak 100 Hi-pass filtered | 250 Hz @ 12 dB Oct. 
• Impedance: Ω4 
• Freq. Response: Hz 200 ÷ 14k 
• Sensitivity: dB/SPL 92
• Outer Ø: mm (inch) 88 (3”7/16) 
• Mounting Ø: mm (inch) 73 (2” 7/8) 
• Total depth: mm (inch) 44 (1” 3/4) 
• Mount. depth: mm (inch) 38 (1” 1/2) 
• Weight: kg (lb) 0,27 (0,60)
• Voice coil Ø: mm (inch) 20 (13/16”)
• Magnet: REN® Neodymium 
• Dome/Cone: Ultra Light Pressed Paper 

Read less [-]