The ML 1600 is a woofer with extraordinary features. The pressed-pulp V-Cone® is combined with cotton fibres, while the surround features a smooth profile, adding to its naturalness and timbre accuracy. The spider exploits the excellent mechanical properties of Nomex®, the mobile voice coil is wound on extra light CCAW (Copper Clad Aluminium Wire) wound on a Kapton® former. The REN® Neodymium motor assembly generates a high-density magnetic flux, to achieve excellent dynamics, contrast and efficiency. Its versatility allows the ML 1600 to offer its highest potential in two-way systems as easily as it reproduces, without compromise, the mid-bass frequency in multi-way systems.

1. The pressed-pulp cone is enriched with cotton fibres combined with water-repellent impregnants. With the absence of the traditional dustcap, the exponential profile generates an outstanding dispersion pattern.
2. The central pole piece is covered with a pure copper sleeve. This combined with its 36 mm CCAW double layer voice coil wound on a Kapton® former provides a linear impedance.
3. The motor assembly is centred upon a uniquely sized REN® Neodymium ring.
4. Anti-resonant aluminium alloy basket; the unique low incidence spokes offer minimum resistance to rear wave emissions.
5. Nomex® spider with integrated lead wires.
6. The butyl rubber cover protects the magnet and contributes to the reduction of unwanted resonances and residual vibrations.

Specifications

• Component: Woofer
• Size: mm (inch) 165 (6”1/2) 
• Power Handling: W Peak 250 | W Continuous 125
• Impedance: Ω 4 
• Freq. Response: Hz 40 ÷ 7k...

Read more [+]

The ML 1600 is a woofer with extraordinary features. The pressed-pulp V-Cone® is combined with cotton fibres, while the surround features a smooth profile, adding to its naturalness and timbre accuracy. The spider exploits the excellent mechanical properties of Nomex®, the mobile voice coil is wound on extra light CCAW (Copper Clad Aluminium Wire) wound on a Kapton® former. The REN® Neodymium motor assembly generates a high-density magnetic flux, to achieve excellent dynamics, contrast and efficiency. Its versatility allows the ML 1600 to offer its highest potential in two-way systems as easily as it reproduces, without compromise, the mid-bass frequency in multi-way systems.

1. The pressed-pulp cone is enriched with cotton fibres combined with water-repellent impregnants. With the absence of the traditional dustcap, the exponential profile generates an outstanding dispersion pattern.
2. The central pole piece is covered with a pure copper sleeve. This combined with its 36 mm CCAW double layer voice coil wound on a Kapton® former provides a linear impedance.
3. The motor assembly is centred upon a uniquely sized REN® Neodymium ring.
4. Anti-resonant aluminium alloy basket; the unique low incidence spokes offer minimum resistance to rear wave emissions.
5. Nomex® spider with integrated lead wires.
6. The butyl rubber cover protects the magnet and contributes to the reduction of unwanted resonances and residual vibrations.

Specifications

• Component: Woofer
• Size: mm (inch) 165 (6”1/2) 
• Power Handling: W Peak 250 | W Continuous 125
• Impedance: Ω 4 
• Freq. Response: Hz 40 ÷ 7k 
• Sensitivity: dB/SPL 93
• Outer Ø: mm (inch) 167 (6”9/16) 
• Mounting Ø: mm (inch) 144 (5”11/16) 
• Total depth: mm (inch) 85 (3”3/8) 
• Mount. depth: mm (inch) 75 (2”15/16) 
• Weight: kg (lb) 1,24 (2,73)
• Voice coil Ø: mm (inch) 36 (1”7/16) 
• Magnet: REN® Neodymium 
• Dome/Cone: Ultra Light Pressed Paper

Read less [-]