With its 51mm (2") maximum depth the DCX 170.3 is a "flat" coax optimised for installation in a vehicle's door and/or other reduced spaces, without giving up on acoustic reproduction quality. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround, a copper voice coil wound on a conex former and painstaking care in its build ensures performance surpassing other components within the same category.
Features
- Shallow profile for an easy replacement of factory speakers.
- Pure copper voice coil, wound on conex former, for maximum lightness.
- Water-repellent treated paper cone.
- TPU surround, for wide excursion and resonance damping.
- Neodymium tweeter with PEI dome, for compactness and energy at high frequencies.
- DIN size basket protected by abrasion-proof dust paint.
- Tin-plated, high current terminals.
- Silver-plated lead wires for maximum reliability and conductivity.
- Epoxy glue for basket and motor system provides perfect coupling.
- Low carbon content plates for maximum magnetic permeability and high heat dissipation.
Specifications
- Component: Two way coaxial
- Woofer size: mm (in.) 170 (6.7)
- Tweeter size: mm (in.) 15 (0.6)
- Power handling: W peak 100 | W continuous 50
- Impedance: Ω 4
- Frequency response: Hz 60 ÷ 21k
- Sensitivity: dB SPL 93
- Magnet size D·d·h: mm (in.) 80 x 32 x 10 (3.1 x 1.3 x 0.4)
- Woofer voice coil Ø: mm (in.) 25 (1.0)
- Woofer magnet: High density flux ferrite
- Tweeter magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
- Weight of one component: kg (lb.) 0,56 (1.23)
...
Read more [+]With its 51mm (2") maximum depth the DCX 170.3 is a "flat" coax optimised for installation in a vehicle's door and/or other reduced spaces, without giving up on acoustic reproduction quality. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround, a copper voice coil wound on a conex former and painstaking care in its build ensures performance surpassing other components within the same category.
Features
- Shallow profile for an easy replacement of factory speakers.
- Pure copper voice coil, wound on conex former, for maximum lightness.
- Water-repellent treated paper cone.
- TPU surround, for wide excursion and resonance damping.
- Neodymium tweeter with PEI dome, for compactness and energy at high frequencies.
- DIN size basket protected by abrasion-proof dust paint.
- Tin-plated, high current terminals.
- Silver-plated lead wires for maximum reliability and conductivity.
- Epoxy glue for basket and motor system provides perfect coupling.
- Low carbon content plates for maximum magnetic permeability and high heat dissipation.
Specifications
- Component: Two way coaxial
- Woofer size: mm (in.) 170 (6.7)
- Tweeter size: mm (in.) 15 (0.6)
- Power handling: W peak 100 | W continuous 50
- Impedance: Ω 4
- Frequency response: Hz 60 ÷ 21k
- Sensitivity: dB SPL 93
- Magnet size D·d·h: mm (in.) 80 x 32 x 10 (3.1 x 1.3 x 0.4)
- Woofer voice coil Ø: mm (in.) 25 (1.0)
- Woofer magnet: High density flux ferrite
- Tweeter magnet: Neodymium
- Woofer cone: Water-repellent pressed paper
- Tweeter dome: PEI
- Weight of one component: kg (lb.) 0,56 (1.23)
Read less [-]
Brand Manager for this product?
