HP 6001 is the most powerful amplifier within the SPL Show line. The overbuilt power supply stage and the D Class output stage featuring 12 Mosfets provide the ability to deliver up to 6000W power. The wide array of possible setups, with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control and remote volume control, make HP 6001 an extremely powerful amplifier, perfect for SPL applications.

Thanks to the Chain Mode function, to cascade a second amplifier into a single load, a devastating amount of power up to 12000W can be achieved with record SPL levels. 

Features

1. In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 22 - 3300 uF 105° Low ESR primary capacitors for a total of 72600uF, 16 - 130A TO247 Mosfets and 8 - 1500uF secondary capacitors capable of 200V.
2. The D-Class output stage features 12 - 240A/300V impulsive current Mosfets robust power and thermal dissipation without compromise.
3. 4 power supply terminal blocks transfer power between the battery and the amplifier with very low contact resistance.
4. Inputs and outputs to cascade-connect a second amplifier, for high power SPL levels.
5. By-passable Lo-Pass fi lter, providing full system design flexibility with external processors.
6. Subsonic fi lter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
7. Continuously adjustable Phase control (0 to 180°); it increases bass alignment of woofer with sub.
8. Included Remote Volume Control (HRC); allows the user to adjust subwoofer level fro...

Read more [+]

HP 6001 is the most powerful amplifier within the SPL Show line. The overbuilt power supply stage and the D Class output stage featuring 12 Mosfets provide the ability to deliver up to 6000W power. The wide array of possible setups, with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control and remote volume control, make HP 6001 an extremely powerful amplifier, perfect for SPL applications.

Thanks to the Chain Mode function, to cascade a second amplifier into a single load, a devastating amount of power up to 12000W can be achieved with record SPL levels. 

Features

1. In order to deliver such extraordinarily high power, the power supply stage features 8 toroidal transformers, 22 - 3300 uF 105° Low ESR primary capacitors for a total of 72600uF, 16 - 130A TO247 Mosfets and 8 - 1500uF secondary capacitors capable of 200V.
2. The D-Class output stage features 12 - 240A/300V impulsive current Mosfets robust power and thermal dissipation without compromise.
3. 4 power supply terminal blocks transfer power between the battery and the amplifier with very low contact resistance.
4. Inputs and outputs to cascade-connect a second amplifier, for high power SPL levels.
5. By-passable Lo-Pass fi lter, providing full system design flexibility with external processors.
6. Subsonic fi lter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
7. Continuously adjustable Phase control (0 to 180°); it increases bass alignment of woofer with sub.
8. Included Remote Volume Control (HRC); allows the user to adjust subwoofer level from dashboard.

Power Supply

• Power supply voltage: 11 ÷ 15 VDC
• Idling current (power ON/OFF): 5 A / 0.04 mA
• Consumption @ 1Ω, 14.4 VDC (Max Musical Power): 210 A
• Remote In: 7 ÷ 15 VDC - 1 mA 

Amplifier Stage Features

• Distortion - THD (100 Hz @ 4Ω): 0.1 %
• Bandwidth (fi lter off): 10 ÷ 500 Hz
• S/N Ratio (A weighted @ 1 V): 86 dB
• Damping factor (100 Hz @ 4Ω): 500
• Pre-In sensitivity: 0.3 ÷ 5 VRMS (15 k Ω)
• Load impedance (MIN): 1 Ω

Output Nominal Power (RMS) @ 14.4 VDC, THD 1%

• 1 Ch: 1670 W x 1 (4 Ω)
• 1 Ch: 2970 W x 1 (2 Ω)
• 1 Ch: 5000 W x 1 (1 Ω) 

Output Power (RMS) @ 14.4 VDC, THD 10%

• 1 Ch: 2150 W x 1 (4 Ω)
• 1 Ch: 3760 W x 1 (2 Ω)
• 1 Ch: 6000 W x 1 (1 Ω)

Chain Power (RMS) @ 14.4 VDC

• 2 Amp - Chain mode (1 Ch): 5940 W (4 Ω - THD 1%)
• 2 Amp - Chain mode (1 Ch): 10000 W (2 Ω - THD 1%)
• 2 Amp - Chain mode (1 Ch): 7520 W (4 Ω - THD 10%)
• 2 Amp - Chain mode (1 Ch): 12000 W (2 Ω - THD 10%)

INPUTS: PRE IN

• Filters On-Off: Yes
• Lo-Pass: 50 ÷ 400 Hz @ 24 dB/Oct.
• SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
• PHASE (adjust): (0 ÷ 180) deg
• Remote Volume Control (adjust): (-50 ÷ 6) dB
• Link Master-Slave: Yes

Size/Weight

• Max size (mm / in.): 644 x 280 x 65,5 / 25.35 x 11.02 x 2.55 
• Weight (kg / lb.): 13,2 / 29.1

Read less [-]