You'll add a big upgrade to your low-frequency listening pleasure when you put an MTX TD500.1D mono amp in your car. This compact amp will fit almost anywhere, driving your subwoofer setup with up to 500 watts RMS. Hook this amp up to a nice set of subs, and you'll hear sounds you've never heard before, even in your favorite songs. And this little bruiser will fit in places where amps don't usually go.

Advanced tone control: You can adjust the low-pass filter and subsonic filter to get the best possible sound from your sub and enclosure. In the unlikely event you want to bump up the bass a little, you also have access to a selectable bass boost.

Features

• Monoblock TD Series Class D Car Amplifier
• RMS Power Rating:
• 4 ohms: 300 watts x 1 chan.
• 2 ohms: 500 watts x 1 chan.
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
• Soft start turn-on
• Mono channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Nickel-plated RCA level inputs
• Nickel-plated screw terminals
• Input sensitivity:
• Low level: 200mV
• Variable low-pass filter (40-220 Hz, 12 dB/octave)
• Subsonic filter (10-50 Hz 12 dB at 15 Hz)
• Frequency response: 10-220 Hz
• CEA-2006 compliant amplifier
• 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 5-1/2"W x 7...

Read more [+]

You'll add a big upgrade to your low-frequency listening pleasure when you put an MTX TD500.1D mono amp in your car. This compact amp will fit almost anywhere, driving your subwoofer setup with up to 500 watts RMS. Hook this amp up to a nice set of subs, and you'll hear sounds you've never heard before, even in your favorite songs. And this little bruiser will fit in places where amps don't usually go.

Advanced tone control: You can adjust the low-pass filter and subsonic filter to get the best possible sound from your sub and enclosure. In the unlikely event you want to bump up the bass a little, you also have access to a selectable bass boost.

Features

• Monoblock TD Series Class D Car Amplifier
• RMS Power Rating:
• 4 ohms: 300 watts x 1 chan.
• 2 ohms: 500 watts x 1 chan.
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
• Soft start turn-on
• Mono channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Nickel-plated RCA level inputs
• Nickel-plated screw terminals
• Input sensitivity:
• Low level: 200mV
• Variable low-pass filter (40-220 Hz, 12 dB/octave)
• Subsonic filter (10-50 Hz 12 dB at 15 Hz)
• Frequency response: 10-220 Hz
• CEA-2006 compliant amplifier
• 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 5-1/2"W x 7-1/4"L x 2-1/8"H

Power Specifications - Subwoofer Channel

• RMS Power @ 4 ohms   300 watts x 1 channels
• RMS Power @ 2 ohms   500 watts x 1 channels

Amplifier Specifications

• Amplifier Class D
• Number of Channels: 1 - Mono
• Total RMS Power Output: 500 watts
• Maximum Input Gauge Size: 4 AWG
• Minimum Impedance Unbridged: 2 ohms
• Minimum Impedance Bridged: Not Bridgeable
• Speaker Level Inputs: No
• Preamp Outputs: No
• Built-in Crossover: Low-pass (LP)
• Low-Pass Crossover Frequency 40 - 220 Hz
• Subsonic Filter: 10 - 50 Hz
• Signal-to-Noise Ratio: 80 dB
• Bass Boost: 0 - 12 dB
• Bass/Gain Remote: No
• Fan Cooled: No
• CEA-2006 Compliant: Yes

Read less [-]