The TD series amplifiers are designed to bring big power in a small footprint. Available in two size mono blocks and a single 4 channel, TD series amplifiers offer excellent system flexibility at a great price. Featuring surface mount design that resists vibration and an extruded aluminum heat sink that dissipates heat effectively, these amps have everything you need to make your system bang.

TD amplifiers are matched to perform best with FPR and RTS subwoofers as well as TX andTDX speakers.

Features

• 4-Channel TD Series Class A/B Car Amplifier
• RMS Power Rating:
• 4 ohms: 75 watts x 4 chan.
• 2 ohms: 100 watts x 4 chan.
• Bridged, 4 Ohms: 200 x 2 chan.
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
• Soft start turn-on
• 4/3/2 channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Nickel-plated RCA level inputs
• Nickel-plated screw terminals
• Input sensitivity:
• Low level: 200mV
• Variable low-pass filter (50-750 Hz, 12 dB/octave)
• Variable high-pass filter (10-200 Hz, 12 dB/octave)
• CEA-2006 compliant amplifier
• Subsonic filter (10-50 Hz 12 dB at 15 Hz)
• Frequency response: 10-220 Hz
• 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 5-1/2"W x 10"L x 2-1/8"H

Power Specifications - Full Range Channels

• RMS Power @ 4 ohms   75 watts x 4 channels
• RMS Power @ 2 ohms   100 wat...

Read more [+]

The TD series amplifiers are designed to bring big power in a small footprint. Available in two size mono blocks and a single 4 channel, TD series amplifiers offer excellent system flexibility at a great price. Featuring surface mount design that resists vibration and an extruded aluminum heat sink that dissipates heat effectively, these amps have everything you need to make your system bang.

TD amplifiers are matched to perform best with FPR and RTS subwoofers as well as TX andTDX speakers.

Features

• 4-Channel TD Series Class A/B Car Amplifier
• RMS Power Rating:
• 4 ohms: 75 watts x 4 chan.
• 2 ohms: 100 watts x 4 chan.
• Bridged, 4 Ohms: 200 x 2 chan.
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
• Soft start turn-on
• 4/3/2 channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Nickel-plated RCA level inputs
• Nickel-plated screw terminals
• Input sensitivity:
• Low level: 200mV
• Variable low-pass filter (50-750 Hz, 12 dB/octave)
• Variable high-pass filter (10-200 Hz, 12 dB/octave)
• CEA-2006 compliant amplifier
• Subsonic filter (10-50 Hz 12 dB at 15 Hz)
• Frequency response: 10-220 Hz
• 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 5-1/2"W x 10"L x 2-1/8"H

Power Specifications - Full Range Channels

• RMS Power @ 4 ohms   75 watts x 4 channels
• RMS Power @ 2 ohms   100 watts x 4 channels
• Bridged RMS Power        200 watts x 2 channels

Amplifier Specifications

• Amplifier Class: AB
• Number of Channels: 4
• Total RMS Power Output: 400 watts
• Maximum Input Gauge Size: 4 AWG
• Minimum Impedance Unbridged: 2 ohms
• Minimum Impedance Bridged: Not Bridgeable
• Speaker Level Inputs: No
• Preamp Outputs: No
• Built-in Crossover: Low-pass (LP) | High-pass (HP)
• High-Pass Crossover Frequency: 10 - 200 Hz
• Low-Pass Crossover Frequency: 50 - 750 Hz
• Subsonic Filter: 10 - 50 Hz
• Signal-to-Noise Ratio: 80 dB
• Bass Boost: 0 - 12 dB
• Bass/Gain Remote: No
• Fan Cooled: No
• CEA-2006 Compliant: 

Read less [-]