- Car Buying
- Car Selling
- Car Ownership
- Car Aftermarket
- On The Move
- Lifestyle
 |
Ceramic Pro Nano Primer is a non-abrasive cleaner polish that prepares the surface prior to applying Ceramic Pro paint coatings. Ceramic Pro Nano Primer will refine and clean the paint work to ensure Ceramic Pro paint coatings can gain maximum adhesion, whilst removing any minor imperfections and increasing gloss levels of the paint work before they are locked in with a Ceramic Pro coating.
Features:
Nano Primer is the preparation process of the paint work as the final step to give the surface a high gloss and mirror effect. Water based solution and without abrasive particles to avoid damaging the surface and also has high coverage of the sun swirling marks.
Working Instruction
The primer is applied thinly and evenly by hand or with a buffing machine. The pressure applied during polishing should be adapted according to the state of the paintwork. Wait for next 1.5 hours then start the sealant applications.
Processing Temperature
5-30°C - Avoid direct sunlight and/or high air humidity.
Safety Instructions
Features:
- Prepares Surfaces for Coating
- Increases Coating Bonding Strength
- Degreases Surfaces
- Removes Minor Imperfections
- Increases Gloss Level
- Easy to Use
- Non-Abrasive
- Silicon-Free
- Water-Based
- Does not Contain Abrasive Particles and therefore does not Remove Even a Micron of Paintwork
- Wax-Free
- Silicone-Free
Nano Primer is the preparation process of the paint work as the final step to give the surface a high gloss and mirror effect. Water based solution and without abrasive particles to avoid damaging the surface and also has high coverage of the sun swirling marks.
Working Instruction
The primer is applied thinly and evenly by hand or with a buffing machine. The pressure applied during polishing should be adapted according to the state of the paintwork. Wait for next 1.5 hours then start the sealant applications.
Processing Temperature
5-30°C - Avoid direct sunlight and/or high air humidity.
Safety Instructions
- Keep out of reach of children.
- Store in a cool dry place (< 25 °C).
- Don't mix with water or other products.
 | New & Used Vehicles are covered for the life of vehicle ownership if annual service requirements are met. Failure to undertake an annual service within the required period will change the period of cover to “5 Years” from the date of the last service which cannot be reversed. Once the 5 years has transpired the warranty will be terminated. Warranty cover is only valid if the Approved Applicator has issued a Warranty Card and it has been registered within 30 days of application. |
|
|
||||||||||||||||||||||||||||||||||
