The EP 5 is a multi-channel amplifier, offering power output of up to 630W. Using a special switch for a fast configuration into 3-channel mode, the EP5 delivers 190W x 2 (4 Ohm) + 250W x 1 (2 Ohm).

The C channel is dedicated to drive the subwoofer. For this reason, it features one single high power stage. The power supply section is equipped with two multi-winding toroidal core transformers along with Low ESR 105°C capacitors, ensuring very high efficiency.
The EP 5 boasts extreme reliability thanks to the use of FR-4 double layer PCB material. 70µm thick copper traces in combination with robust copper bars are used for paths with high current transfer.

Advanced electronics and optimised cooling system allow the EP 5 to provide high power, even under difficult conditions.

Power Supply

• Power supply voltage: 11 ÷ 15 VDC
• Idling current: 1,5 A
• Idling current when off: 0,04 mA
• Consumption @1, 14,4 VDC (Max Musical Power): 44 A 

Amplifier stage

• Distorsion - THD(100 Hz @ 4 Ω): 0,09 %
• Bandwidth A & B Ch (-3 dB): 7 ÷ 60 kHz
• Bandwidth C Ch (-3 dB): 7 ÷ 150 Hz
• S/N Ratio A & B Ch (A weighted @ 1 V): 98 dB
• S/N Ratio C Ch (A weighted @ 1 V): 102 dB
• Damping factor A & B Ch (100 Hz @ 4 Ω): 100
• Damping factor C Ch (100Hz @ 4 Ω): 200
• Pre-In sensitivity: 0,3 ÷ 5 V
• Speaker-In sensitivity: 1,4 ÷ 24 V
• Pre-In impedance: 15 kΩ
• Speaker-In impedance: 5 kΩ
• Load impedance (MIN): 5 Ch: 4 x 2 Ω + 1 x 2 Ω; 3 Ch: 2 x 4 Ω + 1 x 2 Ω

CEA 2006-A RATINGS

• RMS Power (4Ω, ≤ 1%THD+N,14,4 V): 60 W x 4 ch + 160 W x 1 ch
• S/N Ratio (ref. 1W output): 60 W Channels: 80 dBA; 160 W
• Channel: ...

Read more [+]

The EP 5 is a multi-channel amplifier, offering power output of up to 630W. Using a special switch for a fast configuration into 3-channel mode, the EP5 delivers 190W x 2 (4 Ohm) + 250W x 1 (2 Ohm).

The C channel is dedicated to drive the subwoofer. For this reason, it features one single high power stage. The power supply section is equipped with two multi-winding toroidal core transformers along with Low ESR 105°C capacitors, ensuring very high efficiency.
The EP 5 boasts extreme reliability thanks to the use of FR-4 double layer PCB material. 70µm thick copper traces in combination with robust copper bars are used for paths with high current transfer.

Advanced electronics and optimised cooling system allow the EP 5 to provide high power, even under difficult conditions.

Power Supply

• Power supply voltage: 11 ÷ 15 VDC
• Idling current: 1,5 A
• Idling current when off: 0,04 mA
• Consumption @1, 14,4 VDC (Max Musical Power): 44 A 

Amplifier stage

• Distorsion - THD(100 Hz @ 4 Ω): 0,09 %
• Bandwidth A & B Ch (-3 dB): 7 ÷ 60 kHz
• Bandwidth C Ch (-3 dB): 7 ÷ 150 Hz
• S/N Ratio A & B Ch (A weighted @ 1 V): 98 dB
• S/N Ratio C Ch (A weighted @ 1 V): 102 dB
• Damping factor A & B Ch (100 Hz @ 4 Ω): 100
• Damping factor C Ch (100Hz @ 4 Ω): 200
• Pre-In sensitivity: 0,3 ÷ 5 V
• Speaker-In sensitivity: 1,4 ÷ 24 V
• Pre-In impedance: 15 kΩ
• Speaker-In impedance: 5 kΩ
• Load impedance (MIN): 5 Ch: 4 x 2 Ω + 1 x 2 Ω; 3 Ch: 2 x 4 Ω + 1 x 2 Ω

CEA 2006-A RATINGS

• RMS Power (4Ω, ≤ 1%THD+N,14,4 V): 60 W x 4 ch + 160 W x 1 ch
• S/N Ratio (ref. 1W output): 60 W Channels: 80 dBA; 160 W
• Channel: 80 dBA

OUTPUT POWER (RMS) @ 14,4 VDC, THD 1%

• 60 W x 4 + 160 W x 1 (4 Ω)
• 95 W x 4 + 250 W x 1(2 Ω)
• 190 W x 2 (4 Ω) + 160 W x 1 (4 Ω)
• 190 W x 2 (4 Ω) + 250 W x 1 (2 Ω)

Other functions

• Remote In: 6 ÷ 15 VDC - 1 mA
• Remote Out : 12 VDC - 15 mA
• ART™: Automatic Remote Turn-On/Off with Speaker-In
• Fuse: 3 x 30 A

Filters & Controls

• A Channels - Full / Hi-Pass / Lo-Pass: 40 ÷ 150 Hz @ 12 dB/ Oct.
• B Channels - Full / Hi-Pass / Lo-Pass: 40 ÷ 150 Hz @ 12 dB/ Oct.
• C Channels -Lo-Pass: 40 ÷ 150 Hz @ 24 dB/ Oct.

Inputs/Outputs

• Input: PRE/Speaker

Size

• Max size (mm): 240 x 450 x 54
• Weight (kg): 4,80

Read less [-]