- Car Buying
- Car Selling
- Car Ownership
- Car Aftermarket
- On The Move
- Lifestyle
|
The MTX re-Q5 is a 5-channel volume sensing bass restoration device designed to restore bass when adding aftermarket amplifier to a factory audio system. Most OEM systems "roll off" the bass to avoid damaging the speakers at higher volume levels. While this is acceptable when using stock speakers, it's not desired when adding amplifiers as it limits the low frequency output of your system. The MTX re-Q5 solves this problem by sensing the input from the head unit to add more bass at high volume levels and balances the bass response at lower volume levels. You get the bass you want with added performance while keeping your factory radio and your steering wheel controls.
Balance Bass Enhancement
Rather than just turning up the bass linearly, the re-Q5 senses the factory radio output and adjusts its boost level to balance the sound of all 5-channels in your system (Right Front, Left Front, Right Rear, Left Rear, and Sub). You can select for the re-Q5 to perform its Balance Bass Enhancement after or before the factory amplifier.
Smart Engage
An input signal sensing circuit turns the re-Q5 on automatically. There is also a remote turn-on input if you prefer not to use the Smart Engage feature.
Speaker Level Input
There are speaker level inputs for the Front Left/Right, Rear Left/Right and Subwoofer channels. The compatible input range is 250 mV to 30 V. If your factory system has no sub, the re-Q5's sub output is taken from the left and right inputs.
Line Level Output
The line outputs for Front left/right, Rear Left/Right and Sub are individually adjustable. The maximum output is 2.5 ...
Read more [+]
Balance Bass Enhancement
Rather than just turning up the bass linearly, the re-Q5 senses the factory radio output and adjusts its boost level to balance the sound of all 5-channels in your system (Right Front, Left Front, Right Rear, Left Rear, and Sub). You can select for the re-Q5 to perform its Balance Bass Enhancement after or before the factory amplifier.
Smart Engage
An input signal sensing circuit turns the re-Q5 on automatically. There is also a remote turn-on input if you prefer not to use the Smart Engage feature.
Speaker Level Input
There are speaker level inputs for the Front Left/Right, Rear Left/Right and Subwoofer channels. The compatible input range is 250 mV to 30 V. If your factory system has no sub, the re-Q5's sub output is taken from the left and right inputs.
Line Level Output
The line outputs for Front left/right, Rear Left/Right and Sub are individually adjustable. The maximum output is 2.5 ...
Read more [+]




