Based on the Classic Interconnect Cables, the XS series is a real upgrade featuring a stronger conductor as well as the outstanding technology of "X-Shielding" which achieves even higher noise protection and an improved tonal balance. The accuracy of the sound signal transmission is exceptional. 

As other family members of Classic XS series, Classic XS Interconnect Cables are used for high end audio systems. Fixed with a wave impedance of 110 Ohm, these cables can be used both for analog and digital applications. The series also offers a digital version which can be used for professional applications and also as microphone cables. Classic XS Interconnect Cables are available only in terminated lengths for audio in RCA and XLR (Classic XS IC RCA and CLASSIC XS IC XLR) as well as in terminated lengths for digital AES/EBU audio (Classic XS IC AES/EBU).

Analog symmetric X-Shielded interconnect. Twisted BRC multistranded conductors, each insulated by Combined Air Foamed (CAF) PE.

Binding: X-Cross multi layer PTFE (Teflon) tape.
X-Shielding: Inner layer - solid copper foil, mid layer - BRC braid >50%, outer layer - copper foiled PET.
Jacket: Double layer antistatic SPVC, covered by nylon protective sleeve.

The XLR terminated version of Classic IC comes with highest quality XLR connectors (black/red) which are hand assembled using custom made Tchernov SFS/AG solder.

...

Conductor:	2 × 0.75 mm² ≈ 2 × 19 AWG
Total thickness of the jacket:	2.20 mm
Outer diameter:	9.50 mm
Wave impedance:	110 Ohm
Nominal shield density:	> 90%
Jacket colour:	purple

Read more [+]

Based on the Classic Interconnect Cables, the XS series is a real upgrade featuring a stronger conductor as well as the outstanding technology of "X-Shielding" which achieves even higher noise protection and an improved tonal balance. The accuracy of the sound signal transmission is exceptional. 

As other family members of Classic XS series, Classic XS Interconnect Cables are used for high end audio systems. Fixed with a wave impedance of 110 Ohm, these cables can be used both for analog and digital applications. The series also offers a digital version which can be used for professional applications and also as microphone cables. Classic XS Interconnect Cables are available only in terminated lengths for audio in RCA and XLR (Classic XS IC RCA and CLASSIC XS IC XLR) as well as in terminated lengths for digital AES/EBU audio (Classic XS IC AES/EBU).

Analog symmetric X-Shielded interconnect. Twisted BRC multistranded conductors, each insulated by Combined Air Foamed (CAF) PE.

Binding: X-Cross multi layer PTFE (Teflon) tape.
X-Shielding: Inner layer - solid copper foil, mid layer - BRC braid >50%, outer layer - copper foiled PET.
Jacket: Double layer antistatic SPVC, covered by nylon protective sleeve.

The XLR terminated version of Classic IC comes with highest quality XLR connectors (black/red) which are hand assembled using custom made Tchernov SFS/AG solder.

Conductor:	2 × 0.75 mm² ≈ 2 × 19 AWG
Total thickness of the jacket:	2.20 mm
Outer diameter:	9.50 mm
Wave impedance:	110 Ohm
Nominal shield density:	> 90%
Jacket colour:	purple

Connector:

Classic XLR Plug

• Contact group: gold plated (7 um) cuprum
• Insulation: thermal proof plastic
• Case: brass, silver lacquer finishing
• Cable fixing collet: optimised for Tchernov Cable Classic interconnects
• Tang: brass/rubber, silver lacquer finishing/black
• Termination: soldering
• Dimensions: 20 mm diameter x 73 mm overall length mail, 74 mm - female
• Cable diameter: up to 11 mm
• Made in China

Available terminated lengths:

• 2 × 0.62 m
• 2 × 1.00 m
• 2 × 1.65 m
• 2 × 2.65 m
• 2 × 4.35 m
• 2 × 5.00 m
• 2 × 7.10 m

Read less [-]