- Car Buying
- Car Selling
- Car Ownership
- Car Aftermarket
- On The Move
- Lifestyle
 |
A Genesis Project 15 limited Edition Tube amplifier. The design of the Project 15 is unique and special in many ways. Tube preamp stage - this provides warmth and ‘musicality’ Class A+G Technology Power Amplifier, giving total control of the speaker system
The very best componentry throughout, including Mundorf Capacitors, Beyschlag and Welwyn resistors, OnSemi Thermaltrak transistors, Sovtek tubes and Neutrik connectors.
The casing is CNC machined from solid aluminuim plates and billet , then wet blasted, polished and assembled by hand. A plexiglass window allows viewing of all the internal circuitry and is laser engraved with the serial number of the amplifier. Edge lighting illuminates the lettering when the amplifier is operating.
Specifications
All measurements are made at a supply voltage of 14.4v, into resistive loads.
Read more [+]
The very best componentry throughout, including Mundorf Capacitors, Beyschlag and Welwyn resistors, OnSemi Thermaltrak transistors, Sovtek tubes and Neutrik connectors.
The casing is CNC machined from solid aluminuim plates and billet , then wet blasted, polished and assembled by hand. A plexiglass window allows viewing of all the internal circuitry and is laser engraved with the serial number of the amplifier. Edge lighting illuminates the lettering when the amplifier is operating.
Specifications
All measurements are made at a supply voltage of 14.4v, into resistive loads.
- Rated Power: 4 Ω: 2 x 30 W RMS
- Class A mode 2 Ω : 2 x 15 W RMS ( This is not a misprint ! )
- Typical Power: 4 Ω: 2 x 34 W RMS
- Class A mode 2 Ω : 2 x 18 W RMS
- Rated Power: 4 Ω: 2 x 200 W RMS
- Class G Mode 2 Ω : 2 x 300 W RMS
- Typical Power: 4 Ω: 2 x 290 W RMS
- Class G Mode 2 Ω : 2 x 430 W RMS
- Frequency response: +0,-1dB , 20Hz to 20kHz, ref 1 kHz
- S/N Ratio : > 100dB A weighted ,Typ > 105dB
- Channel separation: >100dB @ 20kHz
- CMRR (Balanced input) > 60db, typically > 75 dB (20Hz - 20kHz)
- Input Sensitivity : 0.5 - 5.0 Volts 8.5 Volt pre-out compatible
- Idle current: 8 amps per channel
- Maximum current draw : 53 Amps per channel ( at 2 ohm sinewave)
- Fuses: 2 x 40 Amps
- Size: 625 x 325 x 100 mm
- Weight: 17Kg
Read more [+]
|
|
||||||||||||||||||||||||||||||||||
