Protec Flex Energy SN 5W30 is 100% fully synthetic engine oil, formulated with new friction modifier to enhance fuel economy. Fortified with Low SAP additive chemistry to limit sulphated ash and special type ZDP based chemistry for better phosphorous retention. New active cleaning agent is added to control turbocharger coking. It is formulated with emulsion stabiliser for bio fuel use. Protec Flex Energy SN is certified API SN and ILSAC GF-5 and GM dexos1 approved for SAE 5W30. It is available in SAE 0W20, SAE 0W30, SAE 5W20, SAE 5W30 and SAE 10W30 viscosity grades to provide maximum fuel saving and to meet long drain requirements. Compatible to all vehicles running on lead free gasoline, ethanol, LPG and CNG.

Applications

• Protec Flex Energy SN oils are recommended to all Americans/ Japanese/ Korean/ European petrol vehicles with multi fuel use
• Excellent fuel efficient motor oil meeting API SN, ILSAC GF-5 category

Performance Standards

• Protec Flex Energy SN meets and exceeds the following International specifications requirements:
• GM dexos1 approved- SAE 5W30
• API SN
• ILSAC GF-5
• Ford WSS-M2C946-A: SAE 5W30 - meets the requirements
• Ford WSS-M2C945-A: SAE 5W30 - meets the requirements
• Ford WSS-M2C913-B meets the requirements
• Ford WSS-M2C946-C meets the requirements
• Ford WSS-M2C929-A meets the requirements

Always follow equipment manufacturer's recommendations for required lubricant performance level and oil drain intervals.

Benefits

• Protec Flex Energy SN provides
• Low friction formula helps improve fuel mileage
• Excellent Piston/ Rings cleanliness which...

Read more [+]

Protec Flex Energy SN 5W30 is 100% fully synthetic engine oil, formulated with new friction modifier to enhance fuel economy. Fortified with Low SAP additive chemistry to limit sulphated ash and special type ZDP based chemistry for better phosphorous retention. New active cleaning agent is added to control turbocharger coking. It is formulated with emulsion stabiliser for bio fuel use. Protec Flex Energy SN is certified API SN and ILSAC GF-5 and GM dexos1 approved for SAE 5W30. It is available in SAE 0W20, SAE 0W30, SAE 5W20, SAE 5W30 and SAE 10W30 viscosity grades to provide maximum fuel saving and to meet long drain requirements. Compatible to all vehicles running on lead free gasoline, ethanol, LPG and CNG.

Applications

• Protec Flex Energy SN oils are recommended to all Americans/ Japanese/ Korean/ European petrol vehicles with multi fuel use
• Excellent fuel efficient motor oil meeting API SN, ILSAC GF-5 category

Performance Standards

• Protec Flex Energy SN meets and exceeds the following International specifications requirements:
• GM dexos1 approved- SAE 5W30
• API SN
• ILSAC GF-5
• Ford WSS-M2C946-A: SAE 5W30 - meets the requirements
• Ford WSS-M2C945-A: SAE 5W30 - meets the requirements
• Ford WSS-M2C913-B meets the requirements
• Ford WSS-M2C946-C meets the requirements
• Ford WSS-M2C929-A meets the requirements

Always follow equipment manufacturer's recommendations for required lubricant performance level and oil drain intervals.

Benefits

• Protec Flex Energy SN provides
• Low friction formula helps improve fuel mileage
• Excellent Piston/ Rings cleanliness which increasse engine and oil life
• Enhance seal protection which result in reduction in oil leakage
• Minimise corrosion due to stop-start driving
• Bio Fuel usage
• Excellent protection for high performance engines
• Enhance After Treatment Devices (ATD) protection
• COntrol high temperature oxidation and deposits
• Helps prevent sludge and other damaging deposits

Health and Safety, Environment

The information on this product is available in the ENOC Material Safety Data Sheet (MSDS) as a guide to the precautions
and safe handling of this product and its disposal. For further information we recommend you review the MSDS. Handled
correctly there are no special precautions suggested.



Read less [-]