The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the "rocking-mode" phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
- Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility
- Designed to deliver maximum performance in a sealed enclosure starting from 7.5 lt
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum
- Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure
- Massive motor assembly optimised with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions
- Water-repellent treated paper 8 in....
Read more [+]The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the "rocking-mode" phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
- Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility
- Designed to deliver maximum performance in a sealed enclosure starting from 7.5 lt
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum
- Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure
- Massive motor assembly optimised with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions
- Water-repellent treated paper 8 in. cone featuring a profile developed with simulation and optimized with the Klippel Scan Vibrometer
- Dual voice coil design specifically developed to be combined with either AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers
- Steel mesh grille and plastic gasket included
Specifications
- Component : Subwoofer
- Subwoofer size : 200 (8) mm (in.)
- Subwoofer Voice coil Ø : 40 (1.57) mm (in.)
- Power handling
500 W peak
250 W continuous
- Impedance : 4 + 4 Ω
- Centre to centre distance : 207 (8.15) mm (in.)
- Midrange magnet size D·d·h : 120 (4.72) x 50 (1.97) x 28 (1.1) mm (in.)
- Total driver displacement : 0,67 (0.01) l (cu.in.)
- Hole diameter : 5 (0.2) mm (in.)
- Weight of one speaker : 3,1 (6.83) kg (lb)
- Magnet : High density flux ferrite
- Cone : Water repellent pressed paper
- *Xmech : ±16,5 (0.65) mm (in.)
Electro-Acoustic Parameters
- D : 173mm
- Xmax : ±8,8mm
- Re : 2,1Ω
- Fs : 30 Hz
- Le : 1,1 mH
- Vas : 25,5 l
- Mms : 85g
- Cms : 0,3 mm/N
- BL : 8,8 T•m
- Qts : 0,44
- Qes : 0,46
- Qms : 5,1
- Spl : 83,5 dB
Read less [-]
