The APS 10 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations.
Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the "rocking-mode" phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
- Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility
- Designed to deliver maximum performance in a sealed enclosure starting from 10 lt
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to minimum
- Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure
- Massive motor assembly, optimised with FEM (Finite Element Modeling) for perfect control under high pow...
Read more [+]The APS 10 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations.
Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the "rocking-mode" phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
- Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility
- Designed to deliver maximum performance in a sealed enclosure starting from 10 lt
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to minimum
- Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure
- Massive motor assembly, optimised with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions
- Water-repellent treated paper 10 in. cone, featuring a profile developed with FEM simulation and optimised with the Klippel Scan Vibrometer
- Dual voice coil design specifically developed to be combined with either AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers
- Steel mesh grille and plastic gasket included
Specifications
- Component : Subwoofer
- Subwoofer size : 250 (10) mm (in.)
- Subwoofer Voice coil Ø : 60 (2.36) mm (in.)
- Power handling
- 800 W peak
- 400 W continuous
- Impedance : 4 + 4 Ω
- Centre to centre distance : 255 (10.04) mm (in.)
- Midrange magnet size D·d·h : 140 (5.51) x 70 (2.76) x 30 (1.18) mm (in.)
- Total driver displacement : 1,12 (0.02) l (cu.in.)
- Hole diameter : 5 (0.2) mm (in.)
- Weight of one speaker : 5,245 (6.83) kg (lb)
- Magnet : High density flux ferrite
- Cone : Water repellent pressed paper
- *Xmech : ±18 (0.71) mm (in.)
Electro-Acoustic Parameters
- D : 220mm
- Xmax : ±11mm
- Re : 2,2Ω
- Fs : 27 Hz
- Le : 1,5 mH
- Vas : 41 l
- Mms : 170g
- Cms : 0,2 mm/N
- BL : 10,4 T•m
- Qts : 0,52
- Qes : 0,58
- Qms : 4,7
- Spl : 84 dB
Read less [-]
