The new amplifier CPW shows characteristics of absolute value that guarantees efficiency and quality. Made in Italy both in design and production, this amplifier is characterised by the highly dynamic and remarkable ability for delivery of current.
The amplifier uses MOSFET semiconductors selected and overemphasised of all stages, both power and power. The massive aluminum heat sink with fins, tapered section provides a quick heat transfer and the achievement of high performance targets. In addition, the heat control is also secured by a sophisticated thermal protection.
Anti bump circuits on and off and decoupled input ground from the main enable neutralisation of electromagnetic interference set within the car. The cross-over of the latest generation interior is all of Butterworth 2nd order with about 0 = 0.707 factor.
Specifications
- Power stereo RMS 4 Ω: 300 W x 2
- Power stereo RMS 2 Ω: 500 W x 2
- Power mono RMS 4 Ω: 1000 W x 1
- Harmonic distortion max power 4 Ω mono: 400
- Input Sensitivity RMS: 0.17÷4.3 V
- Input impedance: > 11 kΩ
- Max power adsorbtion 4 Ω bridged: 114 A
- Fuse: 3 x 40 A
- Crossover function 12 dB Low Pass / High pass: 45÷450 Hz
- Frequency multiplier: x1 - x10
- Remote Controller: on board
- Dimensions: 600 x 55 x 187 mm
- Weight: 5.4 (kg)
