The power amplifiers of the Audio System M Series offer an expanded performance, the full range of equipment features and the new premium look of the AudioSystem Series amplifiers with the logo integrated into the massive heat sink.
Features
- 2-channel high-performance amplifier in Class-A / B operation with SMD technology
- MOS-FET PVM power supply
- Load stability up to 2 Ohm stereo per channel and 4 Ohm in bridged mode
- Variable and switchable Subsonic
- Variable high pass filter from 25 to 175 Hz
- Variable switchable low-pass filter from 50 to 300 Hz
- Combination of HP & LP results in bandpass filters from 25 to 175 Hz and from 50 to 300 Hz
- 3-stage efficient ON TOP fan / cooling system
- FSA (Front Stage Adjuster) for analog phase correction on the left channel
- High level input (for original radio) via RCA jacks with automatic power on, no remote cable required
- Extremely wide input sensitivity from 0.2 V to 8 V
- Safety system (MWPC) against overheating, overvoltage and short circuit
- Operating voltage from 10 - 16 volts
- Solid aluminum heat sink with supporting fan cooling
- Connection for optional RTC wired remote control
Specifications
- Operating voltage: 10 - 16 volts
- Output power at 14.4 volts:
- 2 x 135 watts RMS @ 4 Ohm stereo
- 2 x 220 watts RMS @ 2 Ohm stereo
- 1 x 440 Watt RMS @ 4 Ohm bridged
- Signal noise distance:> 90 dB
- Low pass filter: 50 - 300 Hz
- High pass filter / Subsonic filter: 25 - 175 Hz
- Transmission range: 10 Hz - 60 kHz (+/- 1 dB)
- Distortion factor at 4 ohms at 1/2 Rated power: <0,037%
- Channel separation: 75 dB
- F...
Read more [+]The power amplifiers of the Audio System M Series offer an expanded performance, the full range of equipment features and the new premium look of the AudioSystem Series amplifiers with the logo integrated into the massive heat sink.
Features
- 2-channel high-performance amplifier in Class-A / B operation with SMD technology
- MOS-FET PVM power supply
- Load stability up to 2 Ohm stereo per channel and 4 Ohm in bridged mode
- Variable and switchable Subsonic
- Variable high pass filter from 25 to 175 Hz
- Variable switchable low-pass filter from 50 to 300 Hz
- Combination of HP & LP results in bandpass filters from 25 to 175 Hz and from 50 to 300 Hz
- 3-stage efficient ON TOP fan / cooling system
- FSA (Front Stage Adjuster) for analog phase correction on the left channel
- High level input (for original radio) via RCA jacks with automatic power on, no remote cable required
- Extremely wide input sensitivity from 0.2 V to 8 V
- Safety system (MWPC) against overheating, overvoltage and short circuit
- Operating voltage from 10 - 16 volts
- Solid aluminum heat sink with supporting fan cooling
- Connection for optional RTC wired remote control
Specifications
- Operating voltage: 10 - 16 volts
- Output power at 14.4 volts:
- 2 x 135 watts RMS @ 4 Ohm stereo
- 2 x 220 watts RMS @ 2 Ohm stereo
- 1 x 440 Watt RMS @ 4 Ohm bridged
- Signal noise distance:> 90 dB
- Low pass filter: 50 - 300 Hz
- High pass filter / Subsonic filter: 25 - 175 Hz
- Transmission range: 10 Hz - 60 kHz (+/- 1 dB)
- Distortion factor at 4 ohms at 1/2 Rated power: <0,037%
- Channel separation: 75 dB
- Fuse: 2 x 25 A
- Input Sensitivity: 200 mV - 8 V (+/- 5%)
- Dimensions: 295 x 50 x 185 mm
Read less [-]
